| Home | Imprint / Disclaimer | Contact | Dealer-Login | Sitemap Dental |
Technical changes and errors excepted. Minor color variations are subject to typography.

The economic solution for all applications requiring a bone block bone grafts 3rd molars periapical abcess The clinical advantages are tremendousno boneloss very fast healing stable clinical situation after repositioning of the bone block \="" /> Implant surgery excellence Precise programming of 10 programmes with up to 10 steps each Multi-implant: Saves data of up to 11 implants Multi-user: Personalised user settings and programmes Bidirectional, wireless data transfer with PC INTRAsurg 1000 Air: Rotational and reciprocal bone preparation in conjunction with SONICflex bone Programmed operation Every dental implant procedure has a surgical sequence for which the individual steps are planned thoroughly in advance. So doesn’t it make perfect sense to program the settings for these sequences in detail beforehand so they can be called up whenever they are needed? For when you need everything to go according to plan. With KaVo INTRAsurg 1000 / 1000 Air you can store programmes for various different surgical procedures, including sinus lift with implant placement, bone splitting with implant placement or implanting in accordance with the manufacturer's instructions for the implant system being used.   Alternative mode You can also use all functions, such as data communication or reciprocal bone treatment, in manual mode – i.e. without any configured programme. Technical data Name Value Voltage 100 V bis 240 V LUX motor INTRA-LUX SL 550 Light: 25,000 Lux Speed range 300 – 40.000 U/min-1 Max. torque 300 bis 12.000 U/min-1 - 5,5 Ncm 12.000 - 40.000 U/min-1 - 5,5-2,0 Ncm Pump delivery 20 - 110 ml/min 10 programmes with up to 10 steps, customisable parameters - Straight or contra-angle handpiece gearbox ratio - Max. speed - Max. torque - Pump delivery (0-6) - Reverse/forwards mode for motor Implantology brilliance KaVo INTRAsurg 1000 / 1000 Air is equipped with the proven, powerful motor INTRA-LUX SL 550. The available straight and contra-angle handpieces with illumination meet all implant surgery requirements and their attachment is automatically detected by the motor. Naturally, SONICflex is also equipped with this important feature, bringing light to even the most remote areas of the mouth. The perfect accessory for precision dental work. A complete implant procedure can thus be carried out; from preparation of the implant cavity to fixing of the implant. Special motor Automatic matching Max. speed in approx. 1 second Ax. torque preselectable; acoustic signal on reaching 90%; cut-out at 100% 1000 sterilization cycles without maintenance Open system (no closure of the motor for sterilization) Contra-angle handpiece INTRA C3-09 (without light)
Total transmission 27:1 Surgery reducing head C3 (Transmission 3:1) with Surgery reducing shankl C09 (Transmission 9:1) External and internal cooling (Kirschner and Meyer) Max. torque: 55 Ncm Max. operating speed: 11-1,500 rpm Wide range of use: from smoothing the alveolar crest to screwing in the implants Provides sufficient speed and power for milling and drilling At low speeds, always sufficient force for cutting threads and mounting implants Convincing price/performance ratio Very high load capacity Improved vision of the operating area through 25% smaller diameter All information at a glance Only 5 keys Unit can be operated completely using the foot control Key parameters - Max. torque - Max. speed - Coolant pump setting - Transfer ratio of the handpiece and contra-angle handpiece - Direction of motor rotation Technical data Unit   Weight 6.9 kg Size 31 x 23 x 12,5 cm Input voltage 100 V; 120 V; 230 V 50/60 Hz Irrigation function Motor is switched off, only the pump runs Display in standby state Speed range; motor direction; gear step-down of the instrument; max. torque; pump power (0...6) Display during use Actual speed, actual torque Foot control Motor on/off; Speed (min. - max.); Clockwise/counterclockwise operation; Pump on/off; Irrigation function; Switch on program; Select program step (forwards/back)   INTRA S 550 motor   Technology Collectorless induction motor Motor speed Min. 300 rpm; Max. 40,000 rpm Torque 5,5 Ncm: 300 –12,000 rpm 5,0 – 2,0 Ncm: 12,000 – 40,000 rpm Output power 100 W   Software   Program 1 program with 6 steps Program functions Gear step-down of the instrument 1 2 to 1201 Max. speed 80,000 rpm Max. torque 5.5 to 55 Ncm Pump power 0 to 6 Motor direction Clockwise/counterclockwise Torque ax. torque preselectable; acoustic signal on reaching 90%; cut-out at 100% Indications For approximal enamal reduction (AER)For creating space to correct uneven or misaligned teethFor creating space to insert implants To avoid extractions in young persons who have insufficient space in their mouths for permanent teeth   Prof. Joost-Brinkmann, Charité The implant cleaning tip Clinical requirement: Subgingival cleaning of the smooth neck areas of predominantly titanium implants. Special tips are therefore required when professionally cleaning the teeth of patients with implants. Conventional, tempered steel scaler tips are hard and may damage the soft titanium on the surface, which encourages a swift build-up of plaque. KaVo O-drive set KaVo O-drive OD30 instrument OS wheels (oscillating segmental wheels) You will always retain a clear overview of what you are doing, even in areas which are difficult to see, thanks to the optimum illumination provided by the KaVo SONICflex 2003 L. The SONICflex 2003 L handpiece is connected to the INTRAsurg 1000 Air via the air instrument hose.     Four-edged tip (tip no. 80) Indications: Removal of root residue Extraction prior to implantation Osteotomy (bone splitting)   Setting on the SONICflex: Level 3 Diamond burr (tip no. 81) Indication: Preparing the bony window for an external sinus lift   Setting on the SONICflex: Level 3 Diamond-free burr (tip no. 82) Indication: Atraumatic removal of the Schneider´s membrane in a sinus lift   Setting on the SONICflex: Steps 2-3 SONICflex bone tips The SONICflex Bone Saw (tip no. 87) The SONICflex Bone Membrane Disc  (tip no. 85) The SONICflex Bone Harvester  (tip no. 86) SONICflex bone (tip no. 87) Indication Osteotomy Ideal to allow precise, extremely narrow incisions, when cutting ligaments SONICflex bone (tip no. 85) Indication: Ideal for reliably and gently repositioning the Schneider membrane during sinus augmentation SONICflex bone (tip no. 86) Indication: Ideal for easily and quickly harvesting large quantities of bone during sinus augmentation INTRAsurg 300 plus Light motor and light instruments Automatic instrument recognition Storage of the torque Special motor Automatic matching Max. speed in approx. 1 second Ax. torque preselectable; acoustic signal on reaching 90%; cut-out at 100% 1000 sterilization cycles without maintenance Open system (no closure of the motor for sterilization) Contra-angle handpiece INTRA LUX CL3-09 (with light) Total transmission 27:1 Surgery reducing head CL3 Transmission 3:1Cooling:: External and internal cooling (Kirschner and Meyer) Max. torque: 55 Ncm Surgery reducing shank CL09 Transmission 9:1 Max. operating speed: 11-1,500 rpm (mit INTRAsurg 300 plus) Light power: 25,000 Lux Wide range of use: from smoothing the alveolar crest to screwing in the implants. Provides sufficient speed and power for milling and drilling. At low speeds, always sufficient force for cutting threads and mounting implants. Convincing price/performance ratio. Very high load capacity. Improved vision of the operating area through 25% smaller diameter. Rotational + reciprocal = optimum action Motor-driven rotational bone procedures are quick and powerful.Air-driven reciprocal bone preparation is precise, controlled and gentle on tissue and nerves; a very useful choice to have within implant surgery.In an ideal world, it would be easy to switch between the two modes. And with KaVo INTRAsurg 1000 Air, it is; only when used in combination can the two modes really show their strengths to full advantage.  For a sinus lift, for instance, the bone window can now be pre-prepared rotationally and completed reciprocally. This significantly reduces the risk of injuring the Schneider's membrane, which can be subsequently detached from the bone using the appropriate tip. The user then switches the motor back to rotational action to prepare the implant cavity. The combination of these technologies ensures shorter treatment times and reduces risk and trauma for the patient. Intelligent motor control Speed: 300 - 40,000 rpm. Torque: 300 - 12,000 rpm at 5.5 Ncm. Max. torque 12,000 - 40,000 rpm at 2.0 - 5.5 Ncm. Reduced torque when not necessary and therefore less heating of the motor and less stress on the bone. The economical start for future implantologists Very simple operation Intelligent motor control Program with 6 steps Display of actual speed and actual torque New straight and contra-angle handpieces Use The advantage of this tip is that you only need one instrument to release the membrane. Hold the tip against the membrane of the prepared bony window and start to carefully move it inwards. Continue in this way to dig beneath the membrane and release it from the bony wall of the sinus as far as is required for the sinus lift. Then luxate the membrane with the bone lid in a cranial direction. Use Following exposure of the facial wall of the maxillary sinus, use the diamond burr to prepare the bony window (do not exert pressure). If the osteons are very thick, we recommend using the rotating diamond burr for preliminary treatment of the outer compacta. Then use the diamond burr to prepare the bone near to the membrane. Use Remaining root Use the tip like a periotome: Work the root residue in circular movements, digging deeper with the four-edged tip. This will expand the alveoli and cut through the Sharpey’s fibres. Non-invasive extraction prior to implantation When treating teeth with multiple roots, you need to separate the roots carefully using a rotating instrument. Once you have done this, work around each root digging downwards in circular movements. Osteotomy Place the tip at a slight angle (as when screwing) on the surface of the bone (do not exert pressure), and move backwards and forwards in the required gap path. If the bone you are treating is very hard, use a thin rotating Lindemann burr to remove the outer compacta around the osteotomy gap. The high oscillation amplitude facilitates effective and precise incisions. It can be set to 120, 160 or 240 µm easily using the ring switch on the KaVo SONICflex 2003 L handpiece. The elliptical motion of the tips means that you can work in any direction. The SONICflex oscillates at 6 kHz and thereby minimises the overheating of the surrounding tissue. To simplify surgery, a program can be preprogrammed (rotating and oscillating) for the KaVo INTRAsurg 1000 Air. You can easily switch between the programs using the foot control. Technical data KaVo O-drive OD 30Gearbox ratio: 7.4:1 Movement: Reciprocal, 30° oscillation Bur shaft: Multiple-spline shaft Perfect for reciprocal mechanical action Minimal space required Perfect control Fits securely in the contra-angle handpieceSegmental wheelsKomet, Brasseler: Patent DE 197 54 879OS1 M.000.140 (0.30 mm thick) OS1 F.000.140 (0.15 mm thick) OS2 M.000.140 (0.45 mm thick) OS1 F.000.140 (0.30 mm thick) Description: OS = Oscillating stripping F = Medium diamond coating D54 M = Fine diamond coating D 25 000 = Special shaft 140 = Wheel radius (14 mm here) The solution - SONICflex Implant For the effective removal of subgingival plaque and concretion No abrasion, no scratching Quick and easy to useA patient product: effective, no risk of infection, excellent price/performance ratioProphylactic implant cleaning stages Runs on > sonicflex="" 2003="" (l)="">SONICflex 2003 (L) , level 1 1. Tooth width measurement Features Faster and more precise than manual enamel stripping No damage to soft tissue as a result of reciprocal action Radial movement over a large tooth areaEnamel is reduced in one go: No stages, no tilting - quick procedure  Speeds and torques in implantology Clinical procedure Speed (rpm) Max. torque required (Ncm) Smoothing the alveolar crest 1,000 - 1,500 5 - 10 Drilling the cavity 700 - 1,500 till 15 Thread cutting - Standard implants - Large diameter 10 - 50 10 - 50 till 35 till 50 Screwing in implant - Standard implants - Large diameter 10 - 50 10 - 50 till 35 till 50 Prosthetics 10 - 50 till 35 INTRAsurg 300 and C3-09 11 - 1,500 till 55 Program with 6 steps Step Procedure Instrument Max. speed Torque Pump Motor direction 1. Milling and drilling the implant bed 27:1 1.500 55 Ncm 4 2. Cutting the thread 27:1 50 55 Ncm 3 3. Cutting instrument back 27:1 50 55 Ncm 3 4. Screwing in implant 27:1 50 55 Ncm 3 5. Removing the insertion post 27:1 50 55 Ncm 0 6. Mounting the closure cap 27:1 50 55 Ncm 0   The procedure for an implant operation is shown. For simplification, the essential parameters are specified but you can change them all individually. Intelligent motor control Speed: 300 - 40,000 rpm Torque: 300 - 12,000 rpm at 5.5 Ncm Max. torque 12,000 - 40,000 rpm at 2.0 - 5.5 Ncm Reduced torque when not necessary and therefore less heating of the motor and less stress on the bone Intelligent motor control Speed: 300 - 40,000 rpm. Torque: 300 - 12,000 rpm at 5.5 Ncm. Max. torque 12,000 - 40,000 rpm at 2.0 - 5.5 Ncm. Reduced torque when not necessary and therefore less heating of the motor and less stress on the bone. Intelligent motor control FeaturesSpeed: 300 - 40,000 rpmTorque: 300 - 12,000rpm = 5.5 Ncmmax. torque, if required12,000 - 40,000 rpm = 2.0 to 5.5 NcmReduced torque, if not required, thus motor heats up less and bone is subject to less strain   The economical start for future implantologists Very simple operation Intelligent motor control Program with 6 steps Display of actual speed and actual torque New straight and contra-angle handpieces Additional INTRAsurg 1000 Air equipment Air instrument connection (for reciprocal mechanical action)2nd peristaltic pump Pneumatic tubing (not sterilisable) External irrigant tubing (sterilisable) MULTIflex coupling The configuration is always right Before surgery, you preselect the treatment parameters you need for the procedure in question, and INTRAsurg 1000 /1000 Air adheres to these during the procedure. The customisable parameters are as follows:   Rotational or reciprocal mechanical action (INTRAsurg 1000 Air) Torque Speed Gearbox ratio Cooling Rotational direction of motor  Surgery reducing head 67 LHB 2:1For diamond grinding discs in combination with push fit disc guard. Disc guard, short/ longFor discs ISO 204 080/205 080. Foot control The foot control for KaVo INTRAsurg 1000 / 1000 Air, surgically approved (IPX8) Surgery shank 3620 N 1:1Easily dismantled. Optimal hygiene. Internal coolant tubing No inconvenient manipulation Very flexible Easily changeable Sterilizable; sterile disposable tube fittings available How to use the segmental wheel Operating range: 2,700 to 5,500 oscillations per minute Place the segmental wheel from the occlusal or vestiblar and direct through the point of contact in a slow and steady movement. Only use if there is sufficient spray cooling (at least 50 ml per min.) This procedure must be followed by an approximal polish 2. Teeth are stripped from occlusal to vestibular in a single operation (with 2,700 - 5,500 U/min) Features SONICflex clean tip no. 48 Plastic base (PEEK)Single useNo cross-infection  With KaVo’s SONICflex bone set, you can easily access new and minimally invasive forms of treatment. The KaVo SONICflex bone set has 5 tips for all manner of applications. It can be used for oscillating osteotomies (e.g. distraction) and bone splitting, as well as for the minimally invasive removal of teeth and root residue. Moreover, it increases safety in the context of external sinus lifts. Case documentation The series of images shows an example of how the four-edged tip can be used for the minimally invasive extraction of a hemisectioned tooth with apical foci. Pictures: Dr. F. Heinemann, Morsbach Case documentation The pre-operative x-ray reveals the extremely restricted amount of vertical bone in the left posterior maxilla. Since a subsequent implantation was intended, an external sinus lift was performed to increase the amount of bone. In this case, a rotating instrument was used for preliminary treatment. The remaining bone around the osteotomy line was then removed and smoothed with the diamond burr. Pictures: Dr. Dr. S.-H. Gnoth, Cologne Case documentation Once the bony sinus window has been prepared, the Schneider’s membrane is carefully removed. The membrane was completely undermined in the caudal region and luxated in a cranial direction. The subantral space gained by means of this process is filled with bone substitute and sealed with a resorbable membrane. The post-operative x-ray reveals the significant lift of the sinus floor by means of the augmentation (the pre-operative X-ray appears above in the section describing the diamond burr tip). Pictures: Dr. Dr. S.-H. Gnoth, Cologne Axial and sagittal saws Indications: Removal of bone blocks Osteotomy   Setting on the SONICflex: Level 3     Internal coolant tubing No inconvenient manipulation Very flexible Easily changeable Sterilizable; sterile disposable tube fittings available KaVo SONICflex bone; for reciprocal mechanical action Tried-and-tested working methodLarge, variable swing arc 120, 160 and 240 µm Particularly effective and extremely precise Low frequency (6,000 Hz) Minimises heat generation No risk of necrosis Elliptical tip movement Offers complete freedom of movement - both horizontal and vertical Ultra quiet Surgical contra-angle handpiece INTRA LUX CL3-04 The fast implantology contra-angle handpiece CL 3-04 with a reduction ratio of 12:1. For implant systems with fast pilot drills up to 3,000 rpm. Features: Cooling: External and internal cooling (Kirschner and Meyer) Max. operating speed: 25 - 3,300 rpm Max. torque: 45 Ncm Light output: 25,000 Lux Technical data Unit   Weight 6.9 kg Size 31 x 23 x 12,5 cm Input voltage 100 V; 120 V; 230 V 50/60 Hz Irrigation function Motor is switched off, only the pump runs Display in standby state Speed range; motor direction; gear step-down of the instrument; max. torque; pump power (0...6) Display during use Actual speed, actual torque Foot control Motor on/off; Speed (min. - max.); Clockwise/counterclockwise operation; Pump on/off; Irrigation function; Switch on program; Select program step (forwards/back)   INTRA-LUX SL 550 motor   Technology Collectorless induction motor Motor speed Min. 300 rpm; Max. 40,000 rpm Torque 5,5 Ncm: 300 –12,000 rpm 5,0 – 2,0 Ncm: 12,000 – 40,000 rpm Output power 100 W Light 25,000 LUX   Software   Program 1 program with 6 steps Program functions Gear step-down of the instrument 1 2 to 1201 Max. speed 80,000 rpm Max. torque 5.5 to 55 Ncm Pump power 0 to 6 Motor direction Clockwise/counterclockwise Torque ax. torque preselectable; acoustic signal on reaching 90%; cut-out at 100% Contra-angle handpiece INTRA LUX CL3-09 (with light) Total transmission 27:1 Surgery reducing head CL3 Transmission 3:1Cooling:: External and internal cooling (Kirschner and Meyer) Max. torque: 55 Ncm Surgery reducing shank CL09 Transmission 9:1 Max. operating speed: 11-1,500 rpm (mit INTRAsurg 300 plus) Light power: 25,000 Lux Wide range of use: from smoothing the alveolar crest to screwing in the implants. Provides sufficient speed and power for milling and drilling. At low speeds, always sufficient force for cutting threads and mounting implants. Convincing price/performance ratio. Very high load capacity. Improved vision of the operating area through 25% smaller diameter. Surgical contra-angle handpiece INTRA LUX CL3-04 The fast implantology contra-angle handpiece CL 3-04 with a reduction ratio of 12:1. For implant systems with fast pilot drills up to 3,000 rpm. Features: Cooling: External and internal cooling (Kirschner and Meyer) Max. operating speed: 25 - 3,300 rpm Max. torque: 45 Ncm Light output: 25,000 Lux Speeds and torques in implantology Clinical procedure Speed (rpm) Max. torque required (Ncm) Smoothing the alveolar crest 1,000 - 1,500 5 - 10 Drilling the cavity 700 - 1,500 till 15 Thread cutting - Standard implants - Large diameter 10 - 50 10 - 50 till 35 till 50 Screwing in implant - Standard implants - Large diameter 10 - 50 10 - 50 till 35 till 50 Prosthetics 10 - 50 till 35 INTRAsurg 300 plus 11 - 1,500 till 55 Optimum sterilization Motor, CL3-09 and tubes completely sterilizable Very easy and reliable The comprehensive solution for perfectly hygienic work All information at a glance Only 5 keys Unit can be operated completely using the foot control Key parameters - Max. torque - Max. speed - Coolant pump setting - Transfer ratio of the handpiece and contra-angle handpiece - Direction of motor rotation Incl. instrument recognition Contra-angle handpiece INTRA C3-09 (without light)
Total transmission 27:1 Surgery reducing head C3 (Transmission 3:1) with Surgery reducing shankl C09 (Transmission 9:1) External and internal cooling (Kirschner and Meyer) Max. torque: 55 Ncm Max. operating speed: 11-1,500 rpm Wide range of use: from smoothing the alveolar crest to screwing in the implants Provides sufficient speed and power for milling and drilling At low speeds, always sufficient force for cutting threads and mounting implants Convincing price/performance ratio Very high load capacity Improved vision of the operating area through 25% smaller diameter Use Move the saws slowly backwards and forwards in the required gap path, taking care not to exert pressure. In cases of very dense and hard outer compacta bone tissue, preliminary treatment of the area around the osteotomy gap with a thin Lindemann burr may be necessary. Proper use of the SONICflex bone tips Video: Faster and gentler sinus lift with the SONICflex bone 3. Essential: Spray to cool Optimum sterilization Motor, C3-09 and tubes completely sterilizable Very easy and reliable The comprehensive solution for perfectly hygienic work Surgery handpiece INTRA LUX CL 10 (with light) Total step-down ratio: 1:1 Cooling: External cooling (Kirschner and Meyer) Max. torque: 10 Ncm Max. operating speed: 300-40,000 rpm (with INTRAsurg 300 plus)Light power: 25000 lux Surgery insert and chuck. Surgery disc guard For discs ISO 205 080. The KaVo power house. Pure power at low speeds Total transmission 120:1 Surgery reducing head 67 RIC Transmission 4:1 (0.540.8340)With internal cooling system (according to Kirschner and Meyer)and/or external coolant connection. Max. load: 50 Ncm.  Surgery reducing shank 3630 N Transmission 30:1 (0.534.5670)Operating speed: 3 - 340 rpm (lowest speed is dependent on motor, in this case KaVo INTRAsurg 500). Easily dismantled. Improved head chuck. Stronger reducing gear. . Intuitive operation Actual speed/torque display All information at a glance Only 5 keys Instrument can be operated completely by foot control 4. The entire tooth is stripped in a single movement Used in conjunction with the INTRAsurg 1000 Air, SONICflex bone provides you with the ideal combination of rotating and oscillating surgical instruments in a single unit. The power and speed of the proven rotating operating principle is impressive. In sensitive and critical areas, you can protect a maximum amount of soft tissue and nerves by switching to the minimally-invasive oscillating KaVo SONICflex bone.   Case documentation This patient was due to undergo an implantation in the area of tooth 11. Due to the buccal bone atrophy, augmentation with a retromolar bone block from the right mandible was undertaken prior to implantation. Pictures: Dr. E. Guez, Paris Program with 6 steps Step Procedure Instrument Max. speed Torque Pump Motor direction 1. Milling and drilling the implant bed 27:1 1.500 55 Ncm 4 2. Cutting the thread 27:1 50 55 Ncm 3 3. Cutting instrument back 27:1 50 55 Ncm 3 4. Screwing in implant 27:1 50 55 Ncm 3 5. Removing the insertion post 27:1 50 55 Ncm 0 6. Mounting the closure cap 27:1 50 55 Ncm 0   The procedure for an implant operation is shown. For simplification, the essential parameters are specified but you can change them all individually. Intuitive operation Actual speed/torque display All information at a glance Only 5 keys Instrument can be operated completely by foot control with IPX 8 Contra-angle handpiece INTRA LUX CL3-09 (with light) Total transmission 27:1 Surgery reducing head CL3 Transmission 3:1Cooling:: External and internal cooling (Kirschner and Meyer) Max. torque: 55 Ncm Surgery reducing shank CL09 Transmission 9:1 Max. operating speed: 11-1,500 rpm (mit INTRAsurg 300 plus) Light power: 25,000 Lux Wide range of use: from smoothing the alveolar crest to screwing in the implants. Provides sufficient speed and power for milling and drilling. At low speeds, always sufficient force for cutting threads and mounting implants. Convincing price/performance ratio. Very high load capacity. Improved vision of the operating area through 25% smaller diameter. Surgery handpiece INTRA LUX CL 10 (with light) Total step-down ratio: 1:1 Cooling: External cooling (Kirschner and Meyer) Max. torque: 10 Ncm Max. operating speed: 300-40,000 rpm (with INTRAsurg 300 plus)Light power: 25000 lux Surgical motor INTRA-LUX SL 550 Techn. Data (Mat.-No. 1.001.3421) Motorsteuerung INTRAsurg 300 plus, INTRAsurg 1000, INTRAsurg 1000 Air, treatment unit with electronic Speed range min. 300 rpm / max. 40,000 rpm Torque control max. 5.5 Ncm Light 25,000 Lux Surgery handpiece 3610 N1 1:1 (0.524.5600) For handpiece bur with standard length 44.5 mm. May also be used for contra-angle burs if the supplied spacer is employed. Surgical contra-angle handpiece INTRA LUX CL3-04 The fast implantology contra-angle handpiece CL 3-04 with a reduction ratio of 12:1. For implant systems with fast pilot drills up to 3,000 rpm. Features: Cooling: External and internal cooling (Kirschner and Meyer) Max. operating speed: 25 - 3,300 rpm Max. torque: 45 Ncm Light output: 25,000 Lux Advantages of using the KaVo SONICflex bone and KaVO INTRAsurg 1000 Air A simple and cost-effective way to expand your range of treatments The ideal combination of rotating and oscillating surgery in a single unit Maximum tissue protection and minimum post-operative trauma Precise and effective incisions Can be used in many areas of bone treatment (osteotomies, augmentation, extractions and sinus lift) Optimum illumination of areas difficult to visualise. Intelligent supply of coolant to the working tip without compressed air With the KaVo INTRAsurg 1000 Air, you can now also use KaVo’s SONICflex paro, rootplaner and retro tips with sterile coolant 5. Procedure complete - the enamel is reduced on both sides SONICflex 2003 FeaturesLarge, variable swing arc 120, 160 and 240 µm Particularly effective and extremely preciseLow frequency (6,000 Hz) Minimises heat generation No risk of necrosisElliptical tip movement Offers complete freedom of movement - both horizontal and verticalIntensity 25,000 LUXUltra quiet Surgery handpiece INTRA LUX CL 10 (with light) Total step-down ratio: 1:1 Cooling: External and internal cooling (Kirschner and Meyer) Max. torque: 10 Ncm Max. operating speed: 300-40,000 rpm (with INTRAsurg 300 plus) Light power: 25,000 lux Automatic instrument recognition Optimum matching KaVo INTRAsurg 300 plus recognizes the three light instruments CL3-09, CL3-04 and CL10 immediately Whether you want to use the straight or the contra-angle handpiece - the right step-down ratio will be set immediately Surgery handpiece 3610 N2 1:1 (0.524.5610) For handpiece burs with special length 62.5 mm. May also be used for standard handpiece burs (44.5 mm) if the supplied spacer is employed. Surgery handpiece 3610 N3 1:1 (0.524.5620) Only for handpiece burs with special length 70.0 mm. With reinforced drive insert. SONICflex implant The implant cleaning tip. Mehr ... Storage of the torque At the program level, you are mounting up to six implants in the program steps. With the maximum torque value automatically determined in each step, you can safely assess the primarily stability of the mounted implants. For each implant, you can decide when load can be applied. Manual level (display 1): All important settings at a glance - preparation made easy. Program level (display 2): Controlled screwing in of the implants. Program level (display 3): Display of the maximum torques for assessing the primary stability. Intelligent motor control Speed: 300 - 40,000 rpm Torque: 300 - 12,000 rpm at 5.5 Ncm Max. torque 12,000 - 40,000 rpm at 2.0 - 5.5 Ncm Reduced torque when not necessary and therefore less heating of the motor and less stress on the bone Surgery reducing handpiece 3614 N 4:1 (0.524.5430) For handpiece bur. Speed 100 - 10,000 rpm . Surgical motor INTRA S 550 Techn. Data (Mat.-No. 1.000.8072) Motor control INTRAsurg 300, INTRAsurg 300 plus, INTRAsurg 1000, treatment unit with elektronic Speed range min. 300 rpm / max. 40,000 rpm Torque control max. 5.5 Ncm